What To Do If Your Water Heater Suddenly Stops Working
What To Do If Your Water Heater Suddenly Stops Working
Blog Article
The publisher is making a few great points regarding Hot Water Heater Repair as a whole in the article which follows.
Lots of contemporary homes take advantage of an electric water heater for their furnace, because of its convenience and also simplicity of use. However, similar to any other electrical devices, issues may develop with its usage, all of a sudden. It can be truly frustrating to get up to a cold shower as opposed to a hot one or having your bathroom with water that isn't hot adequate and even too hot. Whatever the instance may be, hot water heater issues can be fairly stressful. Fortunately, we have actually made a list of possible solutions to your hot water heater concerns. There are a number of variables that might create a number of these troubles, it could be a concern with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, ensure you shut off the major power supply for security. Whatever the trouble is, getting it repaired must not pose excessive of a concern if you comply with these actions:
Call A Professional:
If after replacing all defective components and resetting your temperature, the hot water heater still isn't working, you may require to contact a professional plumber for a specialist opinion. The issue with your heating system could be that the hot and cold taps have actually been switched over or it may be undersized for the amount of warm water required in your home. Whatever the situation might be, a professional plumber would assist address the problem.
Inspect Your Power Supply:
As fundamental as this might seem, it is very needed. Without ample power, your water heater will not work. So the first thing to do when your water unexpectedly retires is to confirm that it isn't a power problem. Inspect if the fuse is burnt out or the breaker stumbled. If the circuit breaker is the issue, just turn it on and off once more. Replace any type of busted or damaged fuse. Test the appliance with power after these modifications to see if it's currently functioning.
Examine Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't hot enough, you may need to inspect the temperature settings on your top thermostat. Make sure the breaker is turned off prior to doing anything. Open up the accessibility panel and also press the red switch for temperature reset above the thermostat. This should help heat the water. Turn the circuit breaker back on and check if the problem has been dealt with.
Inspect the Heating Element in the Water Heater:
If it's not a power issue, then try having a look at your heating element if it is still working. Evaluate each of your heating elements to be sure the problem isn't with any of them. If any of them is faulty, change that component and afterwards examine whether the warm water is back on.
Final thought
Water heater troubles are not constantly major. A lot of them are due to small problems like a blown fuse or worn-out heating element. Changing the malfunctioning parts should suffice. Nevertheless, if you are still unable to solve the trouble, give a call to your nearby plumber to come to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Do you like reading about What Would Cause My Electric Water Heater to Stop Working?? Place feedback down below. We'd be interested to hear your suggestions about this blog entry. In hopes that you visit us again soon. Appreciated our blog entry? Please share it. Let somebody else find it. Thank you for your time. Come back soon.
Schedule Today
Report this page